Firmware
| 1 | 2013 Navigation/Multimedia receiver firmware updates | (5 April 2019) | /cs/ce/mm/firmware/2013/2013d2/eng.html |
| 2 | Navigation software updater on Garmin website | https://kenwood.garmin.com/kenwood/site |
iPod and iPhone Compatibility List
This site can be used to check the compatibility between KENWOOD's Receiver, and iPod interface adapter.
Select your iPod/iPhone and KENWOOD receiver. Compatibility information and the adapter model which is needed for the connection are displayed.
iPod/iPhone connection
To listen music and watch video
KNA-13HC + KCA-iP103
  |
・High Speed HDMI cable
|
KNA-13HC
|
High Speed HDMI cable・Connect the unit and iPod /iPhone with listed KENWOOD HDMI cable and the Apple Lightning Digital AV Adapter, Lightning to USB Cable (accessory of the iPod/iPhone).
・The Bluetooth settings are also necessary. |
KCA-HD100 + KCA-iP103
 |
・High Speed HDMI cable
|
KCA-HD100
|
High Speed HDMI cable・Connect the unit and iPod /iPhone with listed KENWOOD HDMI cable and the Apple Lightning Digital AV Adapter, Lightning to USB Cable (accessory of the iPod/iPhone).
・The Bluetooth settings are also necessary. |
To listen music
Lightning to USB Cable
 |
Lightning to USB Cable・
Do not keep the Apple Lightning to USB Cable (accessory of the iPod/iPhone) in the car to avoid damage by heat. |
KCA-iP500
 |
iPod audio interface kit
RemarkCommon notes・Before connecting KCA-iP500 to KENWOOD control unit, please make sure your iPod's software is updated to the latest version which are possible to download from APPLE OFFICIAL WEBSITE. ・Data information is dependant on the Head Unit display capability. ・Depending on the connected control unit, source name may be displayed "EXT-MEDIA", "*-MEDIA" or CD Changer ("CD-CH"etc.). ・DNPS function of the control unit cannot be operated with KCA-iP500. ・After connecting your iPod to the KCA-iP500, the first track played will be the track you played last with your iPod,and "RESUMING"will be displayed while playback, since the title number and title name can not be displayed correctly. |
Down
Up
Down
Up
iPod function list
| iPod Interface Adaptor |
Include model KNA-13HC KCA-HD100 KCA-iP103 Lightning to USB Cable Bluetooth KCA-iP302 KCA-iP212 KCA-iP202 KCA-iP22F KCA-iP102 KCA-iP301V KCA-iP240V KCA-iP101 KCA-iP300V KCA-iP100 KCA-iP200 KNA-i909 KNA-i990 KNA-i770 KNA-i77 |
KCA-iP500 |
|
|---|---|---|---|
| Basic operation | |||
| iTunes Tagging | HD Radio™ *1 | ||
| RBDS FM | |||
| SiriusXM *1 | |||
| App & iPod Control Mode/ iPod Control By Hand Mode |
|||
| iPod EQ | |||
| Alphabet Search | |||
| Skip Search | |||
| Related Search | |||
| External Mode | |||
・yes = Feature is supported and confirmed.
no = Feature is not supported by the KENWOOD receiver.
Remark
* Be sure to update the KENWOOD unit to the latest firmware. (February 15, 2010)
See Update Guide
*1 HD Radio broadcast is available only in the USA and some countries.
*1 HD Radio and SiriusXM broadcast is available only in the USA and some countries.
* KTC-HR300 (optional) is necessary to receive HD Radio broadcast.
* It works when KCA-iP22F/ KCA-iP240V is used for connection.
* It works when KCA-iP301V is used for connection.
* SXV-100/200 (optional) is necessary to receive SiriusXM broadcast.
* SiriusXM broadcast is available only in the USA and some countries.
* If the iOS software is upgraded to iOS 4.1, the Songs list is not displayed.
* If the iOS software is upgraded to iOS 4.1, resume play may be disabled.
* If the iOS software is upgraded to iOS 5.0, resume play may be disabled.
・Be sure to update the KENWOOD unit to the latest firmware. (April 5, 2010)
*See Update Guide
・Be sure to update the KENWOOD unit to the latest firmware. (July 28, 2009)
*See Update Guide
・Be sure to update the KENWOOD unit to the latest firmware. (December 11, 2007)
*See Update Guide
・Please use the cable in the iPod housing base.
・Plays back music files only.
・iPod cannot be charged during connection.
・Note: If your "USB" connected devise does not function (e.g. iPhone4, etc. ), please re-connect your "USB" device using "iPod 1 USB port".
Need help, please contact us;
For USA customer's please dial (310) 761-8802 or toll free 1-800-KENWOOD (536-9663)
For Canadian customer's please send an e-mail to techsupport@KENWOOD.ca
・Connect the unit and iPod /iPhone with listed KENWOOD accessory iPod cable and the Apple Lightning - 30 pin adapter.
Do not keep the Apple Lightning - 30 pin adapter in the car to avoid damage by heat.
Video files cannot be played back through this connection.
・Connect the unit and iPod /iPhone with the attached iPod cable and Apple Lightning - 30 pin adapter.
Do not keep the Apple Lightning - 30 pin adapter in the car to avoid damage by heat.
Video files cannot be played back through this connection.
・Audio Signal Only.
No output for audio and video signal of video file when connecting the iPod 5th generation.
・Audio/Video Signal compatible.
・The cable equivalent to KCA-iP100 is included.
・The cable equivalent to KCA-iP101 is included.
・The cable equivalent to KCA-iP301V is included.
・When the DNPS function of the center unit is operated, system will restrict title selection or other functions of the iPod for ten seconds. (Will resume in ten seconds.)
・Connectivity between KCA-iP500 and "KVT" & "DDX" series video models.
•When the disc is changed, "EJECT" will show up instantly.
•Song file over #101 may not be displayed correctly on some of the 'KVT' & 'DDX' video models.
Link
・The list of the playlist etc. cannot be correctly displayed and controlled.
・The Fast Forwarding and Reviewing function does not operate.
(File search function is available.)
When KCA-iP500 is connected to KCA-S210A, no other slave unit is possible to connect.
・The Browsing item selectable is only "PLAYLIST".
・When switching playlist etc., disc number "7" may show up instantly.
・Sound jumps during playback.
・If the iOS software is upgraded to iOS 4.1, sound jumps during playback.
・When the iOS 4.1 software is used, sound jumps during playback. Upgrade it to the latest version.
・If the iOS software is upgraded to iOS 4.1, resume play may be disabled.
・If the iOS software is upgraded to iOS 5.0, resume play may be disabled.
Attention
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Apple, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. iPod mini is a trademark of Apple Inc.
Page TopKENWOOD Bluetooth Compatibility List
This web site provides the compatibility information of your cell-phone and the KENWOOD Bluetooth unit.
Select your KENWOOD Product and your cell-phone. The compatibility information will be displayed.
Control Units compliant with KENWOOD Bluetooth Unit
| Remote Controller | Bluetooth |
|---|---|
| *1 *2 | *5 *6 |
*1You can not dial numbers from this model.
*2Operation on the Head Unit is necessary in order to switch to dialing mode. Optional accessory: Compatible with KCA-RC547 (Remote Controller with Dialing Mode function).
*3Display Character Conversion: If the control unit cannot display accent characters such as "ü" and "ä", set the display character conversion function switch to "ON" to convert them to "U" and "A".
*5Year 2007 and older models do not provide a prioritized connect/disconnect indication for an audio device among the BT audio sources.
*6Optional connection cable (KNA-BT909) is necessary for using this unit.
*10Be sure to update the KENWOOD unit to the latest firmware. (March 16, 2012)
See Update Guide
Supported Cell-phone Compatibility List
・yes = Feature is supported and confirmed.
no = Function unavailable.
Remark
・*1 It is necessary to operate by the cell-phone since the connection takes about 30 seconds.
・*2 Time code, song name, album name, artist name may not be displayed.
・*3 Control buttons may not be displayed or may not be functioned properly.
・*4 The connection may not be succeeded after pairing operation. In this case, connect by operating the cell-phone.
・*5 During playing BT-Audio, calling from your cell-phone may not be succeeded.
・*6 Hands-free connection may not be made automatically after phonebook transfer.
・*7 Switching call mode between "Private" and "Hands-free" may not be correctly worked.
・*8 Please carry out ON setting in the smart-phone.
・*9 Phonebook in SIM cannot be retrieved.
・*10 Setting up on your cell-phone is necessary.
・*11 When pairing, authentication of the connection is necessary from your cell-phone.
・*12 If pairing fails, restart your cell-phone and try pairing operation again.
(1) Enter *#7780# for resetting.
(2) Enter the unlock code. (The default is 12345.)
・*13 If pairing fails, perform pairing operation from your cell-phone.
・*14 If the volume registered in the Phonebook is large, it may take time to download the Phonebook.
・*15 Set the BT function ON from your cell-phone beforehand.
・*16 The unit is compatible with the cell-phone, but connection may become unstable.
・*17 The sound quality becomes poor depending on the distance between the KENWOOD Bluetooth unit and your cell-phone. Hold your cell-phone closer to the KENWOOD Bluetooth unit.
・*23 Playback does not start automatically after ACC OFF and ON. Press the Play button.
・*24 The right cell-phone may not be found in the search result of destination terminal of Phonebook transfer.
・*25 Phonebook of the cell-phone cannot be obtained.
・*26 Incoming calls may not be able to be picked up during BT-Audio playback.
・*27 Individual transfer only.
・*28 Individual or Selection only.
・*29 Individual or All only.
・*30 When connecting the cell-phone by Hands-Free (HFP), several tens of seconds of delay in incoming and outgoing calls or in audio connection (A2DP) may occur unless Phonebook downloading (PBAP) is allowed by operating the cell-phone.
* Depending on the OS or the firmware version of the cell-phone, Bluetooth features may not work. Refer to the website or FAQ provided by the cell-phone supplier for more information.
Common notes
・The functions of the models listed on the table are checked under certain conditions at the date of issue.
Please note that performance may be different from the table above due to modification of phone specifications made after testing.
・Please note that performance may be different from the table above depending on the usage situation of the cell-phone.
・Please note that the cell-phone models for which no information is provided, or whose operation capabilities are not confirmed are not listed.
・This result is based on the sample unit of each model used for testing. It does not prove the operation of all the units of the same model.
・For operation of the cell-phone, please refer to the cell phone instruction manual.
・KCA-BT300/KCA-BT200 is compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)
A2DP(Advanced Audio Distribution Profile)
AVRCP(Audio/Video Remote Control Profile)
・KENWOOD Bluetooth Products are compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)
A2DP(Advanced Audio Distribution Profile)
AVRCP(Audio/Video Remote Control Profile)
・KENWOOD Bluetooth Products are compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)
・Noise may be produced during the call.
・Echoing may be heard loudly during the call.
・Noise may be produced when receiving a call or switching to conversation.
・The ring tone or phone volume may be set loud for some cell-phone models. Make sure to adjust the volume before driving.
・There are models which do not transfer "+"-mark (International call mark) with the Bluetooth connection.
In this case, the incoming call list of KCA-BT300/KCA-BT200 cannot be used for making a call.
・There are models which do not transfer "+"-mark (International call mark) with the Bluetooth connection.
In this case, the incoming call list of KENWOOD Bluetooth Products cannot be used for making a call.
・There are models which do not transfer "+"-mark (International call mark) with the Bluetooth connection.
In this case, the incoming call list of KENWOOD Bluetooth Products cannot be used for making a call.
・There are models which cannot make a call unless the standby display is shown.
・If connection with the cell-phone cannot be made, restart the cell-phone.
・Do not turn off the Head Unit while transferring the phone book.
・There are models where the phone book memorized in the SIM card cannot be transferred.
In this case, copy the phone book in the memory of the cell-phone, and then try to transfer.
・If a phone book cannot be transferred one by one, try to use the function of all phone book transfer.
・Do not leave the cell-phone inside the vehicle. This could damage the cell-phone.
・Depending on the connection with the cell-phone, it may take a while to delete the registration of the cell-phone or to switch to another cell-phone.
・The following numbers and characters can be used for phone numbers: 0 to 9,+, *, #
If a character other than the above is used, the phone number cannot be transferred correctly.
・If a call terminates from a phone with caller identification disabled, the caller name and number may not be displayed normally.
・Audio playing on A2DP (streaming audio) may be interrupted for seconds after its start.
・Audio playing on A2DP (streaming audio) may be interrupted for seconds after its start.
・The type of audio device used may result in a slow response on AVRCP (remote operation).
・The type of audio device used may result in a slow response on AVRCP (remote operation).
・If any Bluetooth operation, such as downloading a phonebook, is carried out while audio is playing on A2DP, the audio may be interrupted.
・If any Bluetooth operation, such as downloading a phonebook, is carried out while audio is playing on A2DP, the audio may be interrupted.
・The date and time of SMS reception may not be synchronized with those of call reception on the cellphone.
・Depending on the combination of devices connected on Bluetooth, A2DP audio (streaming audio) may be interrupted when it plays.
・Depending on the combination of devices connected on Bluetooth, A2DP audio (streaming audio) may be interrupted when it plays.
・Depending on the type of cellphone connected, the audio device connected on A2DP may sound at call origination.
・Depending on the type of cellphone connected, the audio device connected on A2DP may sound at call origination.
・In the phone book and on SMS, \ (\) will appear as \\ (\\).
・If subindexes (such as mobile and home) are used with Voice Recognize, remote subscribers may not be called up normally unless all the subindexes are entered.
・Subindex phonebook data is not updated by downloading phonebook data.
About the Bluetooth module firmware updater
Download the firmware compatible with your cell-phone.
If you can use your cell-phone without problems at the moment, there is no need to update the firmware.
If you do not know the current firmware version of your KENWOOD Bluetooth unit, refer to <Checking the Firmware Version>.
Checking the Firmware Version
Procedure manual (*** KB)KENWOOD Bluetooth Firmware is downloaded
Audio File Specification
About AAC, MP3, WMA and WAV
The playable AAC/MP3/WMA/WAV file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not conforming to the specification, may not play normally, or the file and folder names may not display correctly.
Playable Audio file
| MP3 | Extension | .mp3 | |
|---|---|---|---|
| Format | MPEG 1/2 Audio Layer 3 file | ||
| Transfer bit rate | Disc media | 8-320 kbps / Variable Bit Rate | |
| USB device | 80-320 kbps / Variable Bit Rate | ||
| Sampling frequency | Disc media | 8/ 11.025/ 12/ 16/ 22.05/ 24/ 32/ 44.1/ 48 kHz | |
| USB device | 16/ 22.05/ 24/ 32/ 44.1/ 48 kHz | ||
| Joint STEREO |  |
||
| ID3 Tag (Ver.1) | Ver1.0/ 1.1 (Title/ Artist/ Album) | ||
| ID3 Tag (Ver.2) | Ver2.2/ 2.3/ 2.4 (Title/ Artist/ Album) | ||
| WMA | Extension | .wma | |
| Format | The file in accordance with Windows Media Audio (Except for the file for Windows Media Player 9 or after which applies the new functions) |
||
| Transfer bit rate | 48-192 kbps / Variable Bit Rate | ||
| Sampling frequency | 32/ 44.1/ 48 kHz | ||
| DRM file | — | ||
| Professional | — | ||
| Lossless | — | ||
| Voice | — | ||
| WMA Tag (Content Description) | (Title/ Artist) |
||
| WMA Tag (Extended Content Description) | Disc media | — | |
| USB device | (WM/Album Title) |
||
| AAC-LC | Extension | Disc media | .m4a |
| USB device | .m4a, .aac | ||
| Format | ".m4a" file encoded by AAC-LC format. | ||
| Transfer bit rate | 16-320 kbps | ||
| Sampling frequency | 16/ 22.05/ 24/ 32/ 44.1/ 48 kHz | ||
| DRM file | — | ||
| 2 channel | |
||
| Multi channel | — | ||
| ID3 Tag (Ver.2) | — | ||
| iTunes m4a Meta-data (Song Info.) | (Title/ Artist/ Album) |
||
| WAV (USB device) |
Extension | .wav | |
| Format | RIFF waveform Audio Format (only for LinearPCM) | ||
| Sampling frequency | 32/ 44.1/ 48 kHz | ||
| Bit count | 8/ 16 bit | ||
| Channel | Stereo/Monaural | ||
・Do not attach the extensions to files other than the Audio file. If the extension is attached, the file, which is not the Audio file, will play and outputs a loud noise, causing damage to the speaker.
・The files with copy protection cannot be played.
・Audio files cannot be played depending on the encoding software setting, USB device type, and/or recording conditions.
・The unit may not be compatible with upgrade of compression format standard and additional specifications.
・There are times when play time is not displayed correctly depending on the Audio file recording conditions.
・Sound of WAVE file may be interrupted depending on the performance of the recording media.
Playable storage media file system
| Disc media (DVD±R/RW CD-R/RW) |
File system (Windows) | ISO 9660 Level 1/2 | |
|---|---|---|---|
| ISO 9660 Level 3 | — | ||
| Romeo | |
||
| Joliet | |
||
| Long File Name | |
||
| File system (Macintosh) | — | ||
| File system (UNIX) | — | ||
| Multi-Session | *1 |
||
| USB device | File system (Windows) *2 | FAT16 | |
| FAT32 | |
||
| File system (Macintosh) | — | ||
| File system (UNIX) | — | ||
・CD-RW discs which are quick formatted by the writing software cannot be used.
・When recording to the maximum CD-R/RW media capacity at once, the writing software is set to "Disc at once".
・Joliet is recommended for file system of CD-R/RW. With other file systems, the display may not be shown correctly depending on the operating conditions.
・*1 For CD-DA/ audio file mixed disc, the unit plays only the playback system recorded at the first setout.
・*2 Multi Partition : Not compatible (Some USB devices may have multiple partitions that will be invisible on Windows OS.)
・When the CD-R/RW recorded by CD-ROM MODE 2 (XA) format cannot be played, please record again by using CD-ROM MODE 1 writing format.
Limitation of structure for the file and the folder
| Disc media (DVD±R/RW CD-R/RW) |
Maximum number of directory levels | 8 |
|---|---|---|
| Maximum number of folders | 254 | |
| Maximum number of files per folder | 255 | |
| Maximum number of files (per device) | 64770 | |
| USB device | Maximum number of folder layers | 8 |
| Maximum number of folders (per device) | 255 | |
| Maximum number of files (per folder) | 255 | |
| Maximum number of files (per device) | 65025 | |
| Maximum number of files per playlist | 7000 |
・It may take time to start playing depending on the recording conditions such as file hierarchy and folder structure.
・This includes the Root folder (the folder in the top level). The number of folders shown on your PC is less than it by 1.
The maximum number of characters for display
| File/Folder name | 128 characters | ||
|---|---|---|---|
| MP3 ID3 Tag | Ver. 1.x | 30 characters | |
| Ver. 2.x | Disc media | 64 characters | |
| USB device | 128 characters | ||
| WMA Contents property | Disc media | 64 characters | |
| USB device | 128 characters | ||
| AAC song information | Disc media | 64 characters | |
| USB device | 128 characters | ||
・Number of characters is based on byte unit.
・File/Folder name is the number of the characters including the extensions.
・This unit can display the following versions of MP3 ID3 tag: version 1.0/ 1.1/ 2.2/ 2.3/ 2.4.
・AAC ID3 Tag cannot be displayed.
Page topVideo File Specification
Acceptable media
| Media | Disc media | USB device |
|---|---|---|
| MPEG-1 | |
|
| MPEG-2 | |
|
| DivX | |
— |
| H.264/ MPEG4 AVC | — | |
| WMV | — | |
Acceptable video files
| MPEG-1 | Extension | Disc media | .mpg, .mpeg |
|---|---|---|---|
| USB device | .mpg, .mpeg, .m1v | ||
| Format | MPEG-1 | ||
| Picture size | 352 × 240, 352 × 288 | ||
| Video bit rate | Max. 1.5 Mbps | ||
| Audio format | MPEG Audio Layer 2 | ||
| Audio sampling frequencies | 32/ 44.1/ 48 kHz | ||
| Audio bit rate | Disc media | 32–384 kbps (Only constant bit rates) | |
| USB device | 80–384 kbps (Only constant bit rates) | ||
| MPEG-2 | Extension | Disc media | .mpg, .mpeg |
| USB device | .mpg, .mpeg, .m2v | ||
| Format | MPEG-2 | ||
| Profile & Level | MP@ML (Main Profile at Main Level) | ||
| Picture size | 720 × 480, 720 × 576 | ||
| Video bit rate | Disc media | Max. 10.0 Mbps | |
| USB device | Max. 2.0 Mbps | ||
| Audio format | MPEG Audio Layer 2 | ||
| Audio sampling frequencies | 32/ 44.1/ 48 kHz | ||
| Audio bit rate | Disc media | 32–384 kbps (Only constant bit rates) | |
| USB device | 80–384 kbps (Only constant bit rates) | ||
| DivX | Extension | .divx, .div, .avi | |
| Format | DivX | ||
| Picture size | 352 x 240, 352 x 288, 720 x 480, 720 x 576 | ||
| Video bit rate | Max. 8.0 Mbps | ||
| Audio format | MP3, Dolby Digital | ||
| Audio sampling frequencies | 32/ 44.1/ 48 kHz | ||
| Audio bit rate | 32–384 kbps (Only constant bit rates) | ||
| H.264/ MPEG4 AVC | Extension | .mp4 | |
| Format | H.264/ MPEG4 AVC | ||
| Picture size | 352 x 240, 352 x 288, 720 x 480, 720 x 576 | ||
| Video bit rate | Max. 8.0 Mbps | ||
| Audio format | AAC | ||
| Audio sampling frequencies | 32/ 44.1/ 48 kHz | ||
| Audio bit rate | 80–384 kbps (Only constant bit rates) | ||
| WMV | Extension | .wmv | |
| Format | Windows Media Video 9 | ||
| Picture size | 640 x 480 | ||
| Video bit rate | Max. 2.0 Mbps *1 | ||
| Audio format | WMA | ||
| Audio sampling frequencies | 32/ 44.1/ 48 kHz | ||
| Audio bit rate | 80–384 kbps (Only constant bit rates) | ||
・*1 Pictures and sounds may be interrupted in some conditions.
Picture File Specification
Acceptable media
| Media | Disc media | USB device |
|---|---|---|
| Picture file | — | |
Acceptable picture files
| Extension | .jpg, .jpeg, .png, .bmp |
|---|---|
| Format | JPEG, PNG, BMP |
| Baseline format | Up to a maximum of 8192(W) × 7680(H) pixels |
| Progressive format | Up to a maximum of 1600(W) × 1000(H) pixels |
| File size | Max. 512 K bytes |
・Enlarges and reduces images up to the size shown above to fit to the screen.
・The picture files with information attached (such as Exif) may not be displayed or operated (e.g.: rotation display) properly.
About USB device
Notes on Use of the USB device
This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document).
The following restrictions are placed on the types and usage of available USB devices:
Available USB Devices
| USB standard | USB 1.1/ USB 2.0 |
|---|---|
| USB class | Mass storage class (MSC device) |
| USB subclass | SCSI |
| Protocol | Bulk Only |
| Current supply | Max. 1 A |
・USB Mass Storage Class:
USB devices that the PC can recognize as an external storage without using any special driver or application software.
・Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs.
・Using an unsupported USB device can result in abnormal playback or display of the audio file.
Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device.
・Some of the functions is are limited with a certain USB device.
・Normal operation and power supply is not guaranteed against every USB devices.
About the Connection of the USB device
・When connecting the USB device, usage of the CA-U1EX (500 mA Max: option) is recommended.
・Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.
・You cannot connect a USB device via a USB hub.
 |
・Install the USB device in the place where it will not prevent you from driving your vehicle properly. ・Do not leave the USB device in the vehicle for a long time. It can deform or damage due to direct sunlight, high temperature, etc. ・Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. ・Leave the cap on when not using an USB device. |