United Kingdom



Passive radiator powered subwoofer system

  • Low-pass Filter
  • Dual Voice Coil System
  • Cross-over Network
  • Amplifier Included
  • Speaker level Input
  • Die-Cast Aluminium Heat Sink

Key Features

150W peak power
Passive radiator powered subwoofer system
3 points attenuator
Dual voice coil
RCA & speaker level input
Aluminimum Die-cast Back-frame
Variable cut-off frequency (50-120Hz)

Speaker Features

Speaker SystemActive subwoofer system with Passive radiator
Speaker TypeSubwoofer
Peak Input Power150W
Speaker Size120 x 180mm
Passive radiator systemYes
Dual Voice Coil SystemYes
Wired remote includedYes
Cross-over NetworkBuilt-in amplifier
Amplifier IncludedBuilt-in

Amplifier Features

Maximum power output150W
Low-pass FilterYes
Phase inverter 0°(Normal) / 180°(Reverse)Yes
Power IndicatorYes
Line in1 RCA, 1 mini-jack
Speaker level InputYes
ChassisAluminum Die-cast Back-frame
Die-Cast Aluminium Heat SinkYes
DC cable SuppliedYes

Speaker/woofer Specifications

Peak Input Power150W
Woofer Cone materialPaper cone
Speaker BasketSteel
Aluminum Die-cast back-frame
Speaker SurroundRubber
Frequency Response35Hz ~ 120Hz
Subwoofer Impedance2Ω x 2
Dimensions (W x H x D)369 x 94 x 224mm
Gross Weight3400gr


Maximum power output (4Ω)150W x 1
Low-pass Filter50~120Hz
Signal to Noise Ratio85dB
Frequency response (+0dB, -3dB)35Hz ~ 120Hz
Operating voltage10.5V (16V ~ 14.4V allowable)
Maximum current consumption8A


Remote controlwired remote
Electro tap: 4 pieces
RCA cable
DC cord100 cm
Screws (Parker-type)Ø 5 x 16mm, 6 pieces
Screws (M-type)M4 x 6mm, 8 pieces
Installation brackets1 pieces
Adhesive tape pad1 piece(s)
Bracket A2 pieces
Bracket B2 pieces