United Kingdom

KFC-PS2517W
  • KFC-PS2517W
  • KFC-PS2517W
  • KFC-PS2517W
  • KFC-PS2517W
  • KFC-PS2517W

Additional Images

KFC-PS2517W

PS-series 25cm subwoofer

The KFC-PS2517W PS-Series 25cm Subwoofer delivers tight, punchy bass with up to 2000 W peak power from a tough polypropylene cone and high-ridged two-piece diaphragm. A heat-resistant aluminium bobbin, stress-controlled spider and optimised airflow support reliable, high-output performance, while its 4 ohm design and sealed or ported box compatibility help you build a strong, balanced bass system with ease.

  • Oversized Dimension
  • Heat dissipation technology

Computer-optimised spider

The Computer-Optimized Spider has a redesigned shape to equalize the stress to achieve very high levels of linear travel and increase mechanical durability.

Airflow Control & optimized heat dissipation

The Close Yoke Design [A] has a strong magnetic circuit with the purpose of reproducing deep low frequencies and optimized heat dissipation.
The combination of the Heat-resistant Alminum Bobbin [B] that provides higher thermal conductivity and the Newly-designed Airflow Control [C] that cools the voice coil when air passes through, ensure the efficiency and longevity of the subwoofer.

X-Motif Cone with Diamond Array Pattern

The newly designed X-Motif [A] Cone not only adds strength to the cone but also controls resonance frequency and cuts unnecessary frequency, delivering powerful and solid bass response. The Diamond Array Pattern [B] enhances sound and reduces distortion.

Key Features

250mm Polypropylene Cone (PP Cone)
400 Rated/RMS Input Power
High-ridged Two-piece Diaphragm for solid bass
X-motif cap Technology for resonance control
Single, multi-layered, voice coil.
Aluminum bobbin for better thermal conductivity
Airflow control for optimal heat radition
Stress controlled spider
Push-terminals for easy connection
Sealed/Ported installation capabillity

Speaker Features

Speaker Size250mm
Oversized DimensionYes
Speaker Cone DesignDiamond-Array pattern
Magnet TypeFerrit
Voice-coilsingle, multi-layer voice coil
TerminalsPush Type
SpiderStress controlled spider
Bottom-YokeFully closed bottom yoke
Heat dissipation technologyAirflow control
Installation CapabillitySealed / Ported

Speaker/woofer Specifications

Peak Input Power1300W
Rated Input Power400W
Woofer Cone materialPolypropylene (PP) Cone
Center Cap Typex-motif cap
Spider TypeStress controlled Spider
Speaker BasketSteel
Speaker SurroundFoam
Sensitivity85dB/W/m
Frequency Response33Hz ~ 300Hz
Speaker Impedance4Ω
Dimensions (W x H x D)275 x 275 x 142.2mm
Mouting Hole Diameter Ø230mm
Mounting Depth124mm
Speaker Weight4000gr

Subwoofer Parameters

Nominal impedance (Z)4Ω
DC resistance (Re)3.7Ω
Resonant frequency (FSO)33.7Hz
Mechanical Q factor (QMS)6.95
Electrical Q factor (QES)0.554
Total Q factor (QTS)0.513
Voice coil inductance (LBM)1.9mH
Voice coil diameter (d)50mm
Force factor (BL)13.2T/m
Peak excursion Xmax5.9mm
Moving mass (MMS)124gr.
Volume accoustic compliance (VAS)31.9liter
Piston Area (SD)0.0512m²
Displacement0.9cc
Sealed box volume18.4liter
Sealed Box Dimensions375 x 324 x 229mm ( 18mm thick MDF)(WxHxD)
Vented box volume25.5liter
Vented Box Dimensions464 x 311 x 330mm ( 18mm thick MDF)(WxHxD)
Port dimensions (labyrinth) (W x H x L)29 x 273 x 648mm